Desilter is the third phase solids control equipment to treat the drilling fluids, and to improve the performance of drilling mud, which can be combined with desander. The most common cone is 4” or 5” , mainly to separate the solids in 15-47μm out from the drilling fluids. You can choose the quantity...
Desilter is the third phase solids control equipment to treat the drilling fluids, and to improve the performance of drilling mud, which can be combined with desander. The most common cone is 4” or 5” , mainly to separate the solids in 15-47μm out from the drilling fluids. You can choose the quantity of hydro-cyclones for the desilter according to the capacity.
Brightway is the Hydrocyclone desilter manufacturer and desilter supplier. Briahtway can produce BWCNQ series drilling fluids desilter with good cones for oilfield solids control system, HDD mud recycling system, and pipe-jacking separation plant.
1. Design: Adopt ANSYS limited element analysis to optimize the structure.
2. Material: Use Q235B from BAOSTEEL for body, and High strength compound rubber material used to reduce shock.
3. Vibration motor: Italy OLI /American Martin, or according to customer requirement.
4. Electrical control system:Explosion-proof electrical control system with electrical components as ABB, Siemens, Schneider.
5. Treatment: Grinding, Abrasive blasting, Epoxy zinc rich primer, Intermediate painting with epoxy micaceous iron, and Finishpainting with polyurethane
6. Cone: Made of wearing-resisting polyurethane and in the structure similar to Derrick design.
7. Inlet and outlet: Fast joint connection
Power: 220-240V/ 50Hz, 380-415V/ 50Hz, 440-480V/ 60Hz, 575-600V/ 60Hz
Certification: IEC/UL/ATEX/CE
Remark:
1. Shaker motor type selection can be configured according to customer requirements, explosion-proof and non-explosion-proof can be selected according to industry requirements;
2. The matching shaker and cyclone can be selected according to the purchasing power of customers;
3. Shaker screen can be selected according to customer requirements, iron frame, composite material or plate wave screen;
4. The treatment capacity of the above equipment is measured in mud density: 1.2g /cm3, mud viscosity :45s, screen mesh: 40 mesh;
If you haven’t found useful information about “Desilter” from this page, please fill below table for detailed inquiry.
or send the request to our Company Email: brightway@bwwell.com we will feedback at the soonest!
