• Two sets Cuttings Dryer System has been complete

    Today,Brighway two sets cuttings dryer system is delivered to customer of Jiangsu.the system will be match with screw conveyer and other mud system in oilfield and achieve  drill cuttings drying. After installation of the equipment,Brightway technical staff give guidance for customer about maintenance considerations.then...

    more

  • Drilling Fluids and Drilling Waste Management

    The Weatherford vertical cuttings dryer can recover up to 95 percent of drilling fluids from cuttings. The substantial reduction in liquid/oil adhesion yields retort analyses ofvertical cuttings dryer discards ranging from 6 percent to aslow as 1 percent oil weight. The vertical cuttings dryercan reduce the volume of drilling...

    more

  • Reduce environmental impact and meet compliance regulations

    As regulations on drilling waste become more stringent operators are in need of a reliable waste disposal solution that ensures the waste and the liability of its impact are gone for good. Baroid’s BWL1600 and BWL1500 cuttings dryers can offer a reliable solution by reducing the oil on cuttings ratio of oil-based fluids...

    more

  • 5 Sets Cuttings Dryer Will Be Sent To Siberia made by brightway

    Recently,5 Sets Cuttings Dryer, which is designed and manufactured for one drilling company of Russia,are to be completed and will be sent to Siberia. After purchasing two sets of drilling waste management system,This type Cuttings Dryer is the second cooperation between customer and Brightway.the customers was very pleased...

    more

  • High-speed centrifuge for maximum in liquid/solid separation

    The BWLS1600 cuttings dryer incorporates a high-speed vertical centrifuge that achieves maximum liquid/solid separation in large-volume processing. This mechanism makes the BWLS1600 dryer one of the industry’s best performing and most dependable cutting dryers. The BWLS1600 dryer gives operators a critical advantage in...

    more

  • We need pay attention to the matter of shale shaker installation

    Shale shaker is the first stage solids control equipment.It is mainly used to remove the large particles in drilling fluids. It is also used wildly in the field of Oil drilling, CBM drilling,HDD. To ensure that unnecessary economic losses because of improper installation, Shale shaker installation should be carried out...

    more

  • The New Type Decanter Centrifuge Tested Successfully

    Decanter Centrifuge is the main R&D equipment for Brightway.After upgrading continuously,Brightway BWLWF serise Decanter Centrifuge has reached the advanced international level.Today,Brightway the new type Decanter Centrifuge was tested Successfully. The Testing is divide into two parts: the no – load testing...

    more

  • Common Faults and Maintenance of Drilling Fluid Centrifuge

    Drilling fluid centrifuge can separate solids from the drilling suspension using the principle of centrifugal sedimentation. It is also called Decanting Centrifuge widely used in field of petroleum, chemical, food, pharmaceutical, and environmental protection and other. Drilling Fluid Centrifuge is the core equipments...

    more

  • Thousands of Brightway Shaker Screen Shipped to North Afric

    After long-term discussion and factory inspection, North Africa customer finally placed the order of shaker screens on Brightway. Through one month’s production, the shaker screens are delivered by last week.  Composite shaker screen(585*1165mm),Brightway 500 shaker screen(695*1050mm), Brightway 500 PWP shaker screen(695*1050mm),Brightway 2000...

    more

  • Principle Comparison of Decanter Centrifuge and Pressure Filter

    Drilling Fluid Decanter Centrifuge and Pressure Filter are the important solid – liquid separation equipments for disposing drilling mud and sluge.Compared with pressure filter, decanter centrifuge is the new type sludge dewatering equipment.Because of its mature technology, high solid content after dewatering, low...

    more

Back to top