On 3rd of September, a set of drilling cuttings waste management of Brightway was being intensively installed and commissioned at a drilling site in an oilfield in Shandong. The drilling cuttings waste management was delivered at the end of August and arrived at the drilling site at the beginning of September. The system...
The complete set of drilling waste management equipment can be divided into oil-based mud drilling waste management equipment and water-based mud drilling waste management equipment according to different mud media. The principle of drilling waste management equipment in oilfields is to support drilling waste management...
The selection and application of oil sludge treatment technology and treatment equipment has promoted the positive benefits of oilfield soil remediation and sustainable development of resources. Oil sludge is a kind of hazardous waste produced in industrial production, but it contains more useful substances such as waxes,...
The truck mounted drilling waste management is a drilling waste management that integrates the drilling waste management into a skid or trailer and is convenient to be moved by the trailer. The biggest advantage of truck mounted drilling waste management is its high degree of integration, strong mobility and space saving....
The mud gas separator is a commonly used important equipment for processing drilling fluid gas intrusion in the oil drilling process and a special equipment for primary degassing of gas-invaded drilling fluid. What are the specific installation requirements for gas liquid separators? The mud gas separator separates and...
The treatment technology of oil based mud in the oilfield is inseparable from the supporting use of high-efficiency drill cuttings dryer. Oil based mud is divided into two types: water-in-oil emulsified mud and oil-based mud. The oil-to-water ratio is 50～80 and 50～20 respectively. After being filtered by drill cuttings...
The jet mud mixer is an equipment for adding chemicals and mixing slurry to oilfield drilling mud tanks. It is mainly used to mix and adjust the proportion of the drilling fluid to change the density, viscosity, and water loss, etc. It works well with the shear pump. The conventional jet mud mixer models include:
The drill cuttings dryer is the core equipment of the drilling waste disposal system. It is a single-stage continuous working vertical scraper discharge drying centrifuge. The main function is to effectively separate drill cuttings to achieve solidification and transportation of drill cuttings. The separation treatment...
The SB series centrifugal pump models for conventional oilfield drilling include: BWSB10x8x14, BWSB8x6x14, BWSB6x5x14, BWSB5x4x14, BWSB4x3x13, BWSB2x3x13. In each BWSB10x8x14, there are subdivided models according to the diameter of the impeller, which are mainly manifested in different information such as power and displacement....
The oilfield degasser is to separate the gas (CH4, H2S, etc.) in the drilling fluid through compulsory measures, which can stabilize the specific gravity and viscosity of the drilling fluid and stabilize the performance of the drilling fluid; reduce cavitation and the service life of the sand pump. In order to deepen the...
