The specification of mud gas separator depends on the mud processing capacity in the technical parameters of the liquid-gas separator. When the processing mud volume is between 180 cubic meters/hour and 240 cubic meters/hour, the drilling rig model is ZJ20 or ZJ30, and the liquid-gas separator selection is BWZYQ800; when the processing mud volume is 260-320 cubic meters/hour, the drilling rig model is ZJ40-ZJ50, the liquid-gas separator selection isBWZYQ1000; when the processing capacity is 300-360 cubic meters per hour, the drilling rig model is ZJ70-7J90, and the liquid-gas separator selection is BWZYQ1200.
Brightway mud gas separator
The specification of mud gas separator is very important in oil drilling industry. We should not only pay attention to the specification and use of the drilling fluid liquid-gas separator, but also pay attention to the maintenance and maintenance of the liquid-gas separator in daily work. When the liquid-gas separator is not in use, the drilling fluid in the equipment should be thoroughly cleaned. It is strictly forbidden to keep the mud inside the liquid-gas separator, which will cause the mud to dry and the equipment cannot operate normally.
From the perspective of the specification of the mud gas separator, it is required to separate gas and liquid as much as possible. After passing through the gas-liquid separator, the liquid is liquid and does not contain gas, and gas is gas and does not contain liquid. Of course, the separation efficiency of a separator is actually impossible to be 100%. For various reasons, the actual situation is to choose the gas-liquid separator according to different separation requirements.