The solids control system is composed of some mud cleaning equipment, mud tank and auxiliary equipment. Solid control full facilities including the process of drilling fluid system by the returning system circulation to the drilling pump suction.
The solid control system on the ground laying are three type:I,T and L .
In order to ensure the solid control accurate installed and in use mud tank without excessive displacement , affect the normal use of the solids co ntrol equipment, installed base mud tank requirements at the same level, height is less than 10mm. Solid control system using the site must have sufficient compressive strength (less than 0.5Mpa). Mud tanks such as the use of foundation, foundation plane should be at the same level. The mud tank foundation with a high degree of drilling rig foundation general requirements.
The mud tank should be installed in the preformed based on each tank below, not less than 4 basis, basic length * width * height shall be not less than 3m * 1m * 0.2m, and the plane all foundation should be below the head frame base, and three sets of drilling mud pump foundation etc..
Remarks:The site is mainly used in rig mats, the rig mat made of hard anti-corrosion pine and I-beam. The size can be Customized according to the use requirements, applicable to ZJ20, ZJ30, ZJ40, ZJ50, ZJ70 and other various types of drilling rig and corresponding solid control in drilling depth in 1000-7000m plain, plateau, hills, desert equipment, beach, marshes and other different areas.
