The mud gas separator is a commonly used important equipment for processing drilling fluid gas intrusion in the oil drilling process and a special equipment for primary degassing of gas-invaded drilling fluid. What are the specific installation requirements for gas liquid separators? The mud gas separator separates and...
The treatment technology of oil based mud in the oilfield is inseparable from the supporting use of high-efficiency drill cuttings dryer. Oil based mud is divided into two types: water-in-oil emulsified mud and oil-based mud. The oil-to-water ratio is 50～80 and 50～20 respectively. After being filtered by drill cuttings...
The jet mud mixer is an equipment for adding chemicals and mixing slurry to oilfield drilling mud tanks. It is mainly used to mix and adjust the proportion of the drilling fluid to change the density, viscosity, and water loss, etc. It works well with the shear pump. The conventional jet mud mixer models include:
The drill cuttings dryer is the core equipment of the drilling waste disposal system. It is a single-stage continuous working vertical scraper discharge drying centrifuge. The main function is to effectively separate drill cuttings to achieve solidification and transportation of drill cuttings. The separation treatment...
The SB series centrifugal pump models for conventional oilfield drilling include: BWSB10x8x14, BWSB8x6x14, BWSB6x5x14, BWSB5x4x14, BWSB4x3x13, BWSB2x3x13. In each BWSB10x8x14, there are subdivided models according to the diameter of the impeller, which are mainly manifested in different information such as power and displacement....
The oilfield degasser is to separate the gas (CH4, H2S, etc.) in the drilling fluid through compulsory measures, which can stabilize the specific gravity and viscosity of the drilling fluid and stabilize the performance of the drilling fluid; reduce cavitation and the service life of the sand pump. In order to deepen the...
What are the vacuum degasser models used in oilfield drilling? What are the technical parameters of the vacuum degasser? How to select the vacuum degasser? This article will summarize the model, parameters and selection of vacuum degasser. Model of BWZCQ Vacuum Degasser The vacuum degasser is a secondary solids control...
The high-efficiency anti-precipitation barite recovery centrifuge of Brightway is a barite recovery system integrated with medium-speed and high-speed centrifuges and slurry tanks to efficiently separate barite, prevent barite precipitation and improve drilling fluid treatment efficiency. Brightway produces a system that...
Drilling cuttings and oil sludge vacuum pump is a pneumatic vacuum transfer pump with high load and strong suction. In the oilfield crude oil production and transportation process, a large amount of discarded drill cuttings and oily sludge need to be transported and properly treated, otherwise it will cause environmental...
How to achieve processing oil sludge after drilling? Traditional landfill sludge treatment is mostly carried out by landfill and incineration methods, which causes environmental pollution and waste of resources. According to the characteristics of the oil sludge, Brightway adopts the ‘Oil Sludge Treatment Plant’...
