Oilfield Vacuum Degasser is called also called Gas Buster in oilfield drilling fluids gas separating. Oilfield Vacuum degasser ( Gas Buster ) is among the important equipment in drilling mud system, for the purpose of treating gas-cut drilling fluid, since various invading gases may do harm to mud properties, cause safety risks and accidents, and may affect the service life of some equipment.
6 Steps Maintenance of Oilfield Vacuum Degasser ( Gas Buster ) are provided below:
1. Rinse the head cover of vacuum chamber of the oilfield vacuum degasser ( Gas Buster ) once every week to prevent sundries from blocking the gas passage. When rinsing, dismount exhaust pipe, remove filter screen and insert a high pressure water hose into exhaust stub tube till it is swilled out.
2. After use, shut off power of oilfield vacuum degasser ( Gas Buster ) , demount square flange blind, check whether components and parts are damaged, eliminate foreign matters from the chamber and use a high pressure water hose to rinse the chamber wall and rotor.
3. After finishing drilling every time, carry out the above cleaning to the oilfield vacuum degasser ( Gas Buster ) to guarantee the normal reuse.
4. During operation, check the vacuum gauge at any time and adjust the reducing valve to keep the vacuum degree in the range listed in the following table and to guarantee the normal operation of the oilfield vacuum degasser ( Gas Buster ) .
5. After every use, drain water from both mud-gas separator and pump to avoid frost cracking.
6. Every other month, inject 250-300ml lithium lubricating grease into the main shaft bearing with grease gun.
Brightway Solids Company is a professional oilfield vacuum degasser ( Gas Buster ) supplier from China, and can provide you with BWZCQ240-360 high quality Vacuum degasser ( Gas Buster ) . If you want to learn more about the oilfield vacuum degasser ( Gas Buster ) , you can visit: www.solidscontrolsystem.com/product-item/vacuum-degasser/