Verti g Cuttings Dryer is the important equipment of drilling waste management. Like other equipment, it need to be maintained regularly. If verti g cuttings dryer has some problem, what and how should i do? Now please allow me to introduce five steps maintenance methods of verti g cuttings dryer as follow:
Step One: If there are more leakage from Speed Reducer of verti g cuttings dryer, please check and do it as follow: If the joint surface of Worm Speed Reducer case cover is not closely sealed, please scrape it; Repair the tubing flare when oil leakage occurs at the tubing connection due to unfit bell mouth. Sometimes burrs, scratches and deformations of hydraulic lubricating control system components can cause external or internal oil leakage. If not serious, it can be eliminated by reparation.
Step Two: At the leaking place to eliminate the leaking phenomenon caused by loose connection. During the process, examination should be implemented on fastening situations of all connection. For daily maintenance, operators must also be aware of this point. They are supposed to fasten immediately once loose parts are discovered so that oil leakage or other unexpected problems and accidents will be avoided.
Step Three: Replace them when it is found that oil leakage in speed reducer is caused abrasion on seal elements and unreparable damage on relative components. And remember to match the replacements and the opposite parts properly so as to prevent new oil leakage problem from following the old.
Step Four: It is a vital oil leakage management measure to ensure a smooth return oil passage. Enlarge the oil hole promptly, remove the sewage, do dredging or add new return oil hole tubing when it is found that the holes are not large enough, structure not reasonable and tubing blocked by sewage. A smooth oil passage will greatly reduce the chance of lubricating oil leakage.
Step Five: Somtimes it is necessary to improve sealing materials, change fastening methods, replace lubricating agent, adjust return oil position, modify pre-leakage measures, etc in order to resolve the leakage problem. Retrofitting can take many forms. Generally speaking, it should be remembered not to affect the normal operation nor the original strength and rigidity of machine, especially by adding return chutes, enlarging screw holes, attaching oil dripping pans, etc.
Brightway Solids Control Company is the Verti g Cuttings Dryer Manufacturer in China, and the BWLS-1600 Verti g Cuttings Dryer have been used in the many oil drilling project and exported to the countries, if you want to know more information about Verti g Cuttings Dryer, please visit the page : www.solidscontrolsystem.com/product-item/vertical-cutting-dryer/
